axmol/Box2D/Dynamics/b2WorldCallbacks.h

/*
* Copyright (c) 2006-2009 Erin Catto http://www.gphysics.com
*
* This software is provided 'as-is', without any express or implied
* warranty.  In no event will the authors be held liable for any damages
* arising from the use of this software.
* Permission is granted to anyone to use this software for any purpose,
* including commercial applications, and to alter it and redistribute it
* freely, subject to the following restrictions:
* 1. The origin of this software must not be misrepresented; you must not
* claim that you wrote the original software. If you use this software
* in a product, an acknowledgment in the product documentation would be
* appreciated but is not required.
* 2. Altered source versions must be plainly marked as such, and must not be
* misrepresented as being the original software.
* 3. This notice may not be removed or altered from any source distribution.
*/

#ifndef B2_WORLD_CALLBACKS_H
#define B2_WORLD_CALLBACKS_H

#include <Box2D/Common/b2Settings.h>

struct b2Vec2;
struct b2Transform;
class b2Fixture;
class b2Body;
class b2Joint;
class b2Contact;
struct b2ContactPoint;
struct b2ContactResult;
struct b2Manifold;

/// Joints and fixtures are destroyed when their associated
/// body is destroyed. Implement this listener so that you
/// may nullify references to these joints and shapes.
class b2DestructionListener
{
public:
	virtual ~b2DestructionListener() {}

	/// Called when any joint is about to be destroyed due
	/// to the destruction of one of its attached bodies.
	virtual void SayGoodbye(b2Joint* joint) = 0;

	/// Called when any fixture is about to be destroyed due
	/// to the destruction of its parent body.
	virtual void SayGoodbye(b2Fixture* fixture) = 0;
};

/// Implement this class to provide collision filtering. In other words, you can implement
/// this class if you want finer control over contact creation.
class b2ContactFilter
{
public:
	virtual ~b2ContactFilter() {}

	/// Return true if contact calculations should be performed between these two shapes.
	/// @warning for performance reasons this is only called when the AABBs begin to overlap.
	virtual bool ShouldCollide(b2Fixture* fixtureA, b2Fixture* fixtureB);
};

/// Contact impulses for reporting. Impulses are used instead of forces because
/// sub-step forces may approach infinity for rigid body collisions. These
/// match up one-to-one with the contact points in b2Manifold.
struct b2ContactImpulse
{
	float32 normalImpulses[b2_maxManifoldPoints];
	float32 tangentImpulses[b2_maxManifoldPoints];
};

/// Implement this class to get contact information. You can use these results for
/// things like sounds and game logic. You can also get contact results by
/// traversing the contact lists after the time step. However, you might miss
/// some contacts because continuous physics leads to sub-stepping.
/// Additionally you may receive multiple callbacks for the same contact in a
/// single time step.
/// You should strive to make your callbacks efficient because there may be
/// many callbacks per time step.
/// @warning You cannot create/destroy Box2D entities inside these callbacks.
class b2ContactListener
{
public:
	virtual ~b2ContactListener() {}

	/// Called when two fixtures begin to touch.
	virtual void BeginContact(b2Contact* contact) { B2_NOT_USED(contact); }

	/// Called when two fixtures cease to touch.
	virtual void EndContact(b2Contact* contact) { B2_NOT_USED(contact); }

	/// This is called after a contact is updated. This allows you to inspect a
	/// contact before it goes to the solver. If you are careful, you can modify the
	/// contact manifold (e.g. disable contact).
	/// A copy of the old manifold is provided so that you can detect changes.
	/// Note: this is called only for awake bodies.
	/// Note: this is called even when the number of contact points is zero.
	/// Note: this is not called for sensors.
	/// Note: if you set the number of contact points to zero, you will not
	/// get an EndContact callback. However, you may get a BeginContact callback
	/// the next step.
	virtual void PreSolve(b2Contact* contact, const b2Manifold* oldManifold)
	{
		B2_NOT_USED(contact);
		B2_NOT_USED(oldManifold);
	}

	/// This lets you inspect a contact after the solver is finished. This is useful
	/// for inspecting impulses.
	/// Note: the contact manifold does not include time of impact impulses, which can be
	/// arbitrarily large if the sub-step is small. Hence the impulse is provided explicitly
	/// in a separate data structure.
	/// Note: this is only called for contacts that are touching, solid, and awake.
	virtual void PostSolve(b2Contact* contact, const b2ContactImpulse* impulse)
	{
		B2_NOT_USED(contact);
		B2_NOT_USED(impulse);
	}
};

/// Callback class for AABB queries.
/// See b2World::Query
class b2QueryCallback
{
public:
	virtual ~b2QueryCallback() {}

	/// Called for each fixture found in the query AABB.
	/// @return false to terminate the query.
	virtual bool ReportFixture(b2Fixture* fixture) = 0;
};

/// Callback class for ray casts.
/// See b2World::RayCast
class b2RayCastCallback
{
public:
	virtual ~b2RayCastCallback() {}

	/// Called for each fixture found in the query. You control how the ray cast
	/// proceeds by returning a float:
	/// return -1: ignore this fixture and continue
	/// return 0: terminate the ray cast
	/// return fraction: clip the ray to this point
	/// return 1: don't clip the ray and continue
	/// @param fixture the fixture hit by the ray
	/// @param point the point of initial intersection
	/// @param normal the normal vector at the point of intersection
	/// @return -1 to filter, 0 to terminate, fraction to clip the ray for
	/// closest hit, 1 to continue
	virtual float32 ReportFixture(	b2Fixture* fixture, const b2Vec2& point,
									const b2Vec2& normal, float32 fraction) = 0;
};

/// Color for debug drawing. Each value has the range [0,1].
struct b2Color
{
	b2Color() {}
	b2Color(float32 r, float32 g, float32 b) : r(r), g(g), b(b) {}
	void Set(float32 ri, float32 gi, float32 bi) { r = ri; g = gi; b = bi; }
	float32 r, g, b;
};

/// Implement and register this class with a b2World to provide debug drawing of physics
/// entities in your game.
class b2DebugDraw
{
public:
	b2DebugDraw();

	virtual ~b2DebugDraw() {}

	enum
	{
		e_shapeBit				= 0x0001, ///< draw shapes
		e_jointBit				= 0x0002, ///< draw joint connections
		e_aabbBit				= 0x0004, ///< draw axis aligned bounding boxes
		e_pairBit				= 0x0008, ///< draw broad-phase pairs
		e_centerOfMassBit		= 0x0010, ///< draw center of mass frame
	};

	/// Set the drawing flags.
	void SetFlags(uint32 flags);

	/// Get the drawing flags.
	uint32 GetFlags() const;
	
	/// Append flags to the current flags.
	void AppendFlags(uint32 flags);

	/// Clear flags from the current flags.
	void ClearFlags(uint32 flags);

	/// Draw a closed polygon provided in CCW order.
	virtual void DrawPolygon(const b2Vec2* vertices, int32 vertexCount, const b2Color& color) = 0;

	/// Draw a solid closed polygon provided in CCW order.
	virtual void DrawSolidPolygon(const b2Vec2* vertices, int32 vertexCount, const b2Color& color) = 0;

	/// Draw a circle.
	virtual void DrawCircle(const b2Vec2& center, float32 radius, const b2Color& color) = 0;
	
	/// Draw a solid circle.
	virtual void DrawSolidCircle(const b2Vec2& center, float32 radius, const b2Vec2& axis, const b2Color& color) = 0;
	
	/// Draw a line segment.
	virtual void DrawSegment(const b2Vec2& p1, const b2Vec2& p2, const b2Color& color) = 0;

	/// Draw a transform. Choose your own length scale.
	/// @param xf a transform.
	virtual void DrawTransform(const b2Transform& xf) = 0;

protected:
	uint32 m_drawFlags;
};

#endif